Product number:
9501441110100100
IFA-AUDITED
FilterCube 4H, 11,0 kW, 100 m²
FilterCube 4H, 11,0 kW, 100 m²
€21,450.00*
Delivery time on request
FilterCube 4H, 11,0 kW, 100 m²
The FilterCube 4H stationary filter unit is an IFA-tested filter system that takes up very little
space and can be used for an extremely wide range of applications, primarily in the metalworking
sector.
Filtration performance of over 99 % ensures that fumes and dusts are reliably separated out.
The filter cartridges are cleaned by means of compressed air, meaning that it is not necessary to
replace the filters until the through-flow of air is no longer sufficient.
The dust can be removed from the collecting tray very easily. This reduces downtimes to a
minimum. The clean air can usually be fed back into the workplace, meaning that during periods
in which heating is required, in particular, no new hot air has to be fed into the premises. In this
way, the FilterCube helps reduce energy costs.
Standard equipment
- Four standard filter cartridges, with filter surface area depending on air flow rate
- Display-controlled filter cleaning
- Fan control
- Elbow silencer for upward air outlet
Possible options
- Other grades of filter cartridge, with filter surface area depending on air flow rate
- Soundproof housing for fan (reduces the noise level by approx. 6 dB(A))
- Soundproof housing with rear-mounted casing (reduces the noise level by approx. 8 dB(A))
- Hepa filter extension set as final stage (quality H13 with 99.9 % filtration efficiency)
- Activated carbon filter extension set for filtration of gases and odours
- Safety upgrade (particle sensor, compressed air shut-off valve, maintenance door with
inspection window for FilterCube 4H/4N with connecting device for CO² fire extinguisher
Possibility of combined use with other TEKA products
- Collecting devices such as suction arms, cranes or suction tables
- Spark separator
- Automatic dosing device for precoating
space and can be used for an extremely wide range of applications, primarily in the metalworking
sector.
Filtration performance of over 99 % ensures that fumes and dusts are reliably separated out.
The filter cartridges are cleaned by means of compressed air, meaning that it is not necessary to
replace the filters until the through-flow of air is no longer sufficient.
The dust can be removed from the collecting tray very easily. This reduces downtimes to a
minimum. The clean air can usually be fed back into the workplace, meaning that during periods
in which heating is required, in particular, no new hot air has to be fed into the premises. In this
way, the FilterCube helps reduce energy costs.
Standard equipment
- Four standard filter cartridges, with filter surface area depending on air flow rate
- Display-controlled filter cleaning
- Fan control
- Elbow silencer for upward air outlet
Possible options
- Other grades of filter cartridge, with filter surface area depending on air flow rate
- Soundproof housing for fan (reduces the noise level by approx. 6 dB(A))
- Soundproof housing with rear-mounted casing (reduces the noise level by approx. 8 dB(A))
- Hepa filter extension set as final stage (quality H13 with 99.9 % filtration efficiency)
- Activated carbon filter extension set for filtration of gases and odours
- Safety upgrade (particle sensor, compressed air shut-off valve, maintenance door with
inspection window for FilterCube 4H/4N with connecting device for CO² fire extinguisher
Possibility of combined use with other TEKA products
- Collecting devices such as suction arms, cranes or suction tables
- Spark separator
- Automatic dosing device for precoating
Properties
| Volumetric flow [m³/h]: | 10.000 |
|---|---|
| max. pressure [Pa]: | 4.600 |
| Operating point: | 8.140 m³/h bei 2.700 Pa |
| Engine power (kW): | 11,0 |
| Supply voltage (V): | 400 |
| Connection frequency [Hz]: | 25 |
| Current consumption (A): | 22,5 |
| Current type: | 3Ph+N+PE |
| Automatic cleaning: | yes |
| Filter control: | automatic filter cleaning |
| Engine control: | Stern-Dreieck-Schaltung |
| Cartridges number: | 1 |
| Filter surface [m²]: | 100 |
| Separation efficiency [%]: | > 99 |
| Sound level [dB(A)]: | < 78 |
| Width [mm]: | 800 |
| Depth [mm]: | 800 |
| Length [mm]: | 3.070 |
| Colour: | RAL 7016 |
Replacement parts
Accessories
